MOBY 3200 kg | 7000 lbs
Moby is specifically designed for ROV (Remotely Operated Vehicle) applications and has a holding force of up to 3200 kg.
The basic configuration includes a main handle intended for a Rigmaster, along with a release mechanism consisting of a screw and an interface for a 7-function (or T4) arm. This setup is primarily intended to serve as an anchoring point for the ROV to stay in position.
However, Moby is modular, meaning that the ROV interfaces can be replaced by other designs, and basically anything can be mounted on the top plate.
Moby is made of stainless steel and has no internal moving parts sensitive to seawater. This means simplicity and peace of mind – a robust, lightweight design without the need for any complicated conservation procedures, oil-filled housings and pressure compensators, and it’s definitely not a single-use magnet.
Moby has been designed so that it can be applied on curved surfaces with a diameter down to 600 mm. Finally, the weight is less than 25 kg.
 |
Holding force1 | 3200 kg | 7000 lbs |
 |
Net weight | 24.5 kg | 54.0 lbs |
 |
Overall L × W × H | 390 × 350 × 330 mm | 15 × 14 × 13 in |
1 Measured perpendicularly on a 30 mm mild steel plate